Master's Thesis
Comparison of Low and High-Fidelity Models in Structural Optimization of Strut-Braced Wings
— 2021
Key information
Authors:
Supervisors:
Published in
September 28, 2021
Abstract
The aim of this work is to study the applicability of a Low-Fidelity (LF) structural model for analyzing a given Strut-Braced Wing (SBW) configuration within an optimization environment. To accomplish this goal, the behavior of the structure when subjected to two aerodynamic loads, cruise and pull-up, is firstly compared with a High-Fidelity (HF) model, and then a match between both models is sought. Two optimization problems, one unconstrained and another constrained, set to match the deformed shape of the LF model in the HF one for cruise conditions by changing the thickness distribution, are defined and solved. An additional constrained problem that allows changing the twist distribution is defined as well. Mass and stress for pull-up maneuver conditions are set as constraints for the two constrained problems. A feasible solution in terms of stress is only found when the twist distribution is set as a design variable. However, when analyzing the deformation, the optimized HF model is observed to have differences relative to the LF model higher than 10%. Even though the LF model is computationally advantageous, it underestimated both stress and deformation when compared to the HF model. Therefore, the LF model should only be used to provide general trends at a preliminary design phase of a SBW structure. For a more advanced design stage the HF model should be employed.
Publication details
Authors in the community:
IRENE PAREJA GONZALEZ
ist198103
Supervisors of this institution:
Frederico Afonso
ist156309
Afzal Suleman
ist13672
Fields of Science and Technology (FOS)
mechanical-engineering - Mechanical engineering
Publication language (ISO code)
por - Portuguese
Rights type:
Embargo lifted
Date available:
July 17, 2022
Institution name
Instituto Superior Técnico