Master's Thesis

Study of Instabilities in Industrial Bluff-Body Burners With Flow Rotation

Francisco De Campos Gomes Dinis — 2025

Key information

Authors:

Francisco De Campos Gomes Dinis (Francisco de Campos Gomes Dinis)

Supervisors:

Edgar Caetano Fernandes (Edgar Caetano Fernandes)

Published in

July 9, 2025

Abstract

The decarbonization of high-temperature industrial processes is crucial to mitigating greenhouse gas emissions, particularly in sectors such as ceramics and glass manufacturing. This thesis investigates the combustion instabilities that appear in industrial bluff-body burners with flow rotation using fuels such as methane, hydrogen and a 50% v/v mixture of both of the previous fuels. The primary objective is to understand the conditions under which these instabilities form and how their characteristics are influenced by variations in fuel type, thermal power, and swirl intensity. To investigate this, a semi-industrial bluff-body burner equipped with a variable swirl mechanism was employed. Several diagnostic techniques were used to identify and analyze instabilities: flame morphology for visualizing flame structure, particle image velocimetry (both 2D and stereoscopic) for velocity field measurements, and dynamic pressure probes for acoustic characterization. Results revealed that precessing vortex cores (PVCs) only appeared when the swirl angle exceeded 30º. While fuel type had minimal impact on the PVC precession frequency, thermal power significantly influenced it. A parabolic relationship was observed between swirl number and precession frequency at lower swirl levels, transitioning to a linear trend at higher swirl numbers. Kelvin-Helmholtz instabilities were also identified, with their behavior dependent on both swirl intensity and fuel composition. These instabilities were present when using methane or the 50% fuel mixture but were not detected with pure hydrogen (except for a very slight detection at the highest swirl setting).

Publication details

Authors in the community:

Supervisors of this institution:

Fields of Science and Technology (FOS)

mechanical-engineering - Mechanical engineering

Publication language (ISO code)

por - Portuguese

Rights type:

Embargo lifted

Date available:

April 22, 2026

Institution name

Instituto Superior Técnico