Master's Thesis

Simulação de uma fábrica de polietileno de alta densidade (PEAD) em Aspen Plus

João Manuel Ferreira Lourenço — 2023

Key information

Authors:

João Manuel Ferreira Lourenço (João Manuel Ferreira Lourenço)

Supervisors:

Pedro Miguel Gil de Castro (Pedro Miguel Gil de Castro); André Vilelas

Published in

November 16, 2023

Abstract

Nesta tese, pretendeu-se simular, em Aspen Plus V11, a secção de polimerização da fábrica de polietileno de alta densidade (PEAD) da Repsol Polímeros, S.A., recorrendo ao módulo Aspen Polymers. O processo existente consiste na produção de polímero em pasta, em dois reatores operados em série ou em paralelo, através de polimerização por coordenação com catalisador Ziegler-Natta. A simulação da polimerização envolveu a definição de uma cinética reacional e o consequente ajuste dos parâmetros cinéticos a partir dos dados da fábrica. Para este efeito, concebeu-se um algoritmo em três fases: (i) ajuste dos parâmetros cinéticos com modelação do catalisador com apenas um centro ativo; (ii) aplicação da deconvolução a uma curva de distribuição de peso molecular experimental obtida por GPC-IR; (iii) ajuste dos parâmetros cinéticos com modelação do catalisador contemplando o número estimado de centros ativos do catalisador. A aplicação deste algoritmo foi bem-sucedida, uma vez que foram obtidas curvas de distribuição de peso molecular com sobreposição quase total às experimentais. De facto, foi verificado que a ausência de dados GPC essenciais, como a primeira curva dos graus produzidos em série, limitou a utilização do Data Fit, o que causou significativos impedimentos ao processo de ajuste. Adicionalmente, a falta de dados GPC para outros graus produzidos na fábrica, levou a que apenas se pudessem considerar quatro graus de PEAD, o que também limitou o alcance deste estudo. Apesar destas limitações, tanto as curvas como todos os parâmetros de qualidade, para todos os graus considerados, foram alcançados com margens de erro aceitáveis. The aim of this thesis is to simulate, in Aspen Plus V11 with the Aspen Polymers feature, the polymerization section of the high-density polyethylene (HDPE) factory of Repsol Polímeros S.A. in Sines. The existing process concerns the slurry production of HDPE through coordination polymerization using a Ziegler-Natta catalyst, using a two-reactor configuration in series or in parallel. The simulation assumed a set of reactions with kinetic parameters estimated from plant data. A 3-part algorithm was designed for this purpose: (i) estimation of the kinetic parameters with the catalyst model considering one active site; (ii) subsequent application of the deconvolution procedure to an experimental molecular weight distribution curve obtained by GPC-IR; (iii) estimation of the kinematic parameters with the catalyst model contemplating five different active sites present in the reactor, provided by deconvolution. The use of this algorithm was considered successful, since it was possible to obtain molecular weight distribution curves from the simulation that almost completely overlap the experimental ones. Indeed, it was found that the absence of key GPC data, such as the first curve for the in-series configuration grades, limited the usefulness of the Data Fit tool, which was a significant impairment for the successful estimation process. Additionally, the lack of GPC data for other grades produced at the plant, also limited the range of this study, leading to the consideration of only four PEAD grades. Despite these limitations, both the curves and all quality parameters, for the grades considered, had error margins that were deemed acceptable.

Publication details

Authors in the community:

Supervisors of this institution:

RENATES TID

203837843

Degree Name

Mestrado em Engenharia Química

Fields of Science and Technology (FOS)

chemical-engineering - Chemical engineering

Keywords

  • HDPE
  • Simulation
  • Ziegler-Natta kinetics
  • Non-linear estimation
  • PEAD
  • Simulação
  • Cinética Ziegler-Natta
  • Ajuste não-linear

Publication language (ISO code)

por - Portuguese

Rights type:

Embargo lifted

Date available:

October 23, 2024

Institution name

Instituto Superior Técnico