Article In: orcid

Numerical Study of Geometrical Properties of Full-Span Tubercle Leading Edge Wing at Post-Stall Condition

Journal of Applied Fluid Mechanics

A. Nikkhoo; Ali Esmaeili; Ali Esmaeili — 2023

Key information

Authors:

A. Nikkhoo; Ali Esmaeili (Ali Esmaeili); Ali Esmaeili; Ali Esmaeili

Published in

September 1, 2023

Abstract

<jats:p>In order to upsurge the maneuverability of micro aerial vehicles, a tubercle leading edge inspired by the whale flipper was applied as a passive stall control method. Although this method could be useful to control stall phenomena, the effect of geometrical properties on the flow physic should be investigated to reach the root of them. According to preceding research, the effect of some parameters on the tubercle leading edge wing is a hot topic among researchers. The aim of this research is to explore the effects of sectional wing geometries like amplitude, wavelength, thickness, maximum thickness location, and camber on the aerodynamic feature of full-span tubercle leading edge wing, particularly at 22 degree in post-stall circumstances. The results present that by reducing the amplitude about 2.5%c, the lift coefficient upsurges by about 3.5%; instead, the drag coefficient reduces about 6%. On the other hand, by decreasing the wavelength from 46.2%c to 11.7%c, the drag coefficient and the lift coefficient decrease by about 15% and 19%, respectively. Furthermore, as the thickness rises from 10.55%c to 18.14%c, the lift and drag coefficient goes down about 9.4% and 2.9%, respectively. Furthermore, by increasing the camber from 2.56%c to 3.34%c, the lift to drag ratio goes down by about 1.06%. Finally, by raising the last design variable (maximum thickness location) from 0.26c to 0.51c, the lift to drag ratio increases about 13.7%.</jats:p>

Publication details

Authors in the community:

  • Ali Esmaeili

    Ali Esmaeili

    ist90808

    In: orcid

    ID: 206383510

Title of the publication container

Journal of Applied Fluid Mechanics

ISSN

1735-3572

Fields of Science and Technology (FOS)

mechanical-engineering - Mechanical engineering

Publication language (ISO code)

eng - English

Rights type:

Only metadata available