Master's Thesis

Aerodynamic Validation: An On-Track Study of a Formula Student Vehicle

Tiago Prioste Guerreiro — 2026

Key information

Authors:

Tiago Prioste Guerreiro (Tiago Prioste Guerreiro)

Supervisors:

Luís Rego da Cunha de Eça (Luís Rego da Cunha de Eça); André Calado Marta (André Calado Marta)

Published in

July 2, 2026

Abstract

Aerodynamic validation is essential in Formula Student, where CFD-based design decisions must be correlated with real on-track behaviour. This work presents an experimental and numerical assessment of the aerodynamic performance of the FST14 Formula Student prototype. The objective was to validate straight-line aerodynamic loads through on-track testing and compare the experimental estimates with CFD predictions for equivalent configurations, contributing to the correlation of numerical models with full-scale data. The experimental campaign used two approaches: constant-velocity tests for downforce estimation and coastdown tests for drag estimation. Vehicle response was measured through suspension potentiometers and pitot-based airspeed instrumentation, allowing aerodynamic loads to be reconstructed from ride-height variation and dynamic pressure. Dedicated calibrations and a MATLAB data-processing framework supported signal conditioning and parameter estimation. CFD simulations were carried out for representative operating points from the experimental dataset. The constant-velocity tests yielded CLA=3.467m2, with axle-wise values of 1.602m2 and 1.890m2, resulting in an aerodynamic balance of 46.20%, while the coastdown analysis produced CDA=1.661m2. The CFD comparison reproduced the overall aerodynamic trends, but overpredicted the regression-based total, front, and rear downforce coefficients by 32.7%, 38.9%, and 25.2%, respectively, exceeding the typical lift-related numerical error previously reported for the adopted framework. The CFD prediction also indicated a more front-loaded balance of 50.9%. The discrepancies are plausibly linked to ride-height sensitivity, experimental uncertainty, geometry simplifications, boundary-condition assumptions, and steady RANS limitations. Overall, this work establishes a repeatable methodology for on-track aerodynamic validation and a structured workflow for aerodynamic development and simulation correlation.

Publication details

Authors in the community:

Supervisors of this institution:

Fields of Science and Technology (FOS)

mechanical-engineering - Mechanical engineering

Publication language (ISO code)

eng - English

Rights type:

Embargoed access

Date available:

May 1, 2027

Institution name

Instituto Superior Técnico