Master's Thesis

Flexural-Torsional Buckling of Pultruded GFRP U-Section Columns

Manuel Bernardo Varão Dias Moreira Braga — 2026

Key information

Authors:

Manuel Bernardo Varão Dias Moreira Braga (Manuel Bernardo Varão Dias Moreira Braga)

Supervisors:

André Rafael Dias Martins (André Rafael Dias Martins); Nuno Miguel Rosa Pereira Silvestre (Nuno Silvestre)

Published in

July 7, 2026

Abstract

Profiles manufactured from materials such as pultruded Glass Fiber-Reinforced Polymer (pGFRP) have become of paramount importance in structural applications. The technical specification CEN/TS 19101:2022 provides resistance models for analytically obtaining the compressive resistances associated with flexural-torsional (FT) and minor-axis flexural (Fm) buckling. In this thesis, seven U-shaped cross-section columns (120 × 50 × 6 mm), with varying lengths (1500, 1600, and 1900 mm), were tested to failure under fixed-end conditions. The specimens exhibited Fm buckling deformation or FT–Fm interactive buckling failures. Additionally, the material mechanical properties were characterized through experimental testing, including calcination tests and longitudinal tensile, longitudinal and transverse compressive, and in-plane shear tests. The experimental investigation was complemented by a numerical study, in which finite element models were developed to plan and simulate the laboratory conditions of the structural compressive testing. Linear buckling and non-linear analyses were performed. For the latter, initial geometric imperfections were considered, based on the deformed shapes akin to the first two buckling modes (FT and Fm), and load-displacement curves were presented, as in the structural tests. In most cases, the ratios between the ultimate loads obtained from the nonlinear analyses and the critical buckling loads obtained from the linear buckling analyses were lower than unity (Pu/Pcr<1). Regarding the ultimate loads obtained from structural testing, such ratios ranged between 0.67 and 0.80. The compressive resistance value estimates for FT (NFT) and Fm (NE), calculated using analytical formulae, were systematically higher than the experimentally obtained ultimate loads, with average ratios of Pu/NFT=0.705 and Pu/NE=0.657, respectively.

Publication details

Authors in the community:

Supervisors of this institution:

Fields of Science and Technology (FOS)

mechanical-engineering - Mechanical engineering

Publication language (ISO code)

eng - English

Rights type:

Embargoed access

Date available:

April 18, 2027

Institution name

Instituto Superior Técnico