PhD Thesis
Durability for sustainability of multilayer external wall thermal insulation systems
— 2024
Key information
Authors:
Supervisors:
Published in
April 12, 2024
Abstract
Com o objetivo de alcançar um parque edificado com impacte neutro no clima até 2050, a União Europeia implementou várias diretivas destinadas a minimizar o consumo de energia dos edifícios e a reduzir as emissões de CO2 no setor. Uma das melhores estratégias para melhorar a sustentabilidade dos edifícios consiste no aumento da resistência térmica da envolvente (por exemplo, reduzindo os coeficientes de transmissão térmica das paredes exteriores). Neste contexto, a utilização de sistemas de isolamento térmico multicamada com argamassas térmicas ou placas de isolamento em paredes exteriores tem vindo a aumentar nos últimos anos, quer em construção nova, quer na reabilitação térmica de fachadas de edifícios. No entanto, existe ainda uma considerável falta de informação em relação ao desempenho e durabilidade destes sistemas. O principal objetivo desta tese é proporcionar um conhecimento abrangente em relação à durabilidade de sistemas multicamada de isolamento térmico pelo exterior, de modo a aumentar a sua eficiência e sustentabilidade a longo prazo. O principal foco da investigação consiste na avaliação da durabilidade dos sistemas, identificando os principais agentes e mecanismos de degradação e dando especial atenção a problemas de colonização biológica. A metodologia considerada para atingir o principal objetivo da tese pode ser dividida em quatro tópicos de investigação: (i) caracterização experimental de sistemas de isolamento térmico pelo exterior com revestimento sobre isolante do tipo ETICS; (ii) avaliação da durabilidade de ETICS através de ciclos de envelhecimento artificial acelerado e envelhecimento natural; (iii) avaliação da durabilidade de sistemas multicamada de isolamento térmico pelo exterior com argamassas térmicas (envelhecimento acelerado e natural); e (iv) avaliação da influência do comportamento higrotérmico dos sistemas no desenvolvimento de bolores através de monitorização in situ, simulações numéricas e validação experimental. A investigação da caracterização experimental e da avaliação da durabilidade dos ETICS aprofundou o conhecimento sobre o comportamento a longo prazo destes sistemas quando sujeitos a vários ciclos de envelhecimento artificial acelerado (i.e., ciclos higrotérmicos, radiação UV e exposição a poluentes atmosféricos (SO2)). Para além disso, avaliou-se também a durabilidade a longo prazo dos ETICS após dois anos de exposição natural em ambientes urbano e marítimo em Portugal. Os resultados mostraram que o desempenho e a durabilidade do sistema completo são significativamente afetados pela composição do sistema de revestimento (i.e., camada de base e camada de acabamento). O envelhecimento acelerado com ciclos higrotérmicos foi aquele que causou maior degradação nos sistemas, em comparação com os restantes ciclos de envelhecimento artificial e com o envelhecimento natural. De facto, apesar dos agentes de degradação mais significativos estarem presentes em ambos os envelhecimentos (i.e., acelerado e natural), verificou-se degradação precoce considerando os ciclos de envelhecimento acelerado, potenciando diferentes impactes nos sistemas. Ao fornecer uma visão abrangente sobre a durabilidade dos ETICS a um conjunto de ciclos de envelhecimento artificial consecutivos e complementares, mas também considerando diferentes condições de exposição natural (urbanas vs marítimas), aprofundou-se o conhecimento dos mecanismos de degradação e do efeito sinergístico produzido pelos diferentes agentes ambientais. Depois de se obter um conhecimento consistente em relação aos agentes e mecanismos de degradação que afetam o desempenho e a durabilidade dos ETICS com placas de isolamento térmico, avaliou-se também a durabilidade de sistemas multicamada de isolamento térmico pelo exterior com argamassas térmicas. A perda de desempenho destes sistemas foi avaliada após envelhecimento acelerado com ciclos higrotérmicos e após um ano de envelhecimento natural em ambiente urbano. Os resultados mostraram tendências de desempenho semelhantes entre os sistemas envelhecidos artificialmente e naturalmente, registando-se um aumento significativo da absorção de água por capilaridade e da capacidade de secagem, elevada microfissuração na superfície dos sistemas, traços de crescimento biológico na superfície e alterações estéticas. No entanto, os resultados mostraram também que os possíveis efeitos sinergéticos de outros agentes de degradação (por exemplo, radiação UV ou colonização biológica) que não foram incluídos no envelhecimento acelerado têm um impacto significativo no desempenho a longo prazo dos sistemas. Assim, apesar da dificuldade que existe em reproduzir estes efeitos em condições laboratoriais, os agentes de degradação relevantes que foram identificados na exposição natural devem ser também considerados em métodos otimizados de envelhecimento artificial acelerado. Por fim, no que diz respeito à influência do comportamento higrotérmico dos sistemas no crescimento de bolores na superfície, os resultados mostraram um impacte significativo da flutuação da temperatura superficial (TS) e da humidade relativa superficial (HRS). Tanto o índice 2 (i.e., percentagem de tempo em que HRS = 100%) como o índice 3 (i.e., percentagem de tempo em que HRS ≥ 80% e 15 ºC ≤ TS ≤ 30 ºC) indicaram um maior potencial de crescimento biológico na superfície do sistema à base de cal e um menor potencial de crescimento no sistema de base acrílica e com uma argamassa térmica com EPS. O sistema com acabamento de cal obteve a maior taxa de crescimento de bolor após envelhecimento, o que sugere que tanto o índice 2 como o índice 3 podem fornecer uma indicação sobre o crescimento biológico na superfície dos sistemas, dado que estão de acordo com as observações efetuadas in situ. Os resultados mostraram que a combinação de condições microclimáticas desfavoráveis (i.e., HRS ≤ 80%; TS < 15 ºC ou TS > 30 ºC) e a hidrofobicidade das superfícies são fundamentais para prevenir o crescimento de bolores em sistemas multicamada de isolamento térmico pelo exterior. Os resultados obtidos nesta tese podem, portanto, contribuir para a definição das bases necessárias para aumentar o desempenho e a durabilidade dos sistemas aplicados tanto em construção nova, como na reabilitação térmica de fachadas de edifícios. In order to achieve a climate-neutral building stock by 2050, the European Union has implemented several directives aimed at minimizing the energy consumption of buildings and reducing the CO2 emissions related to the built environment. One of the best strategies for improving the sustainability of buildings is to increase the thermal resistance of the envelope (e.g., by lowering the U-values of external walls). In this context, the use of multilayer external wall thermal insulation systems with thermal mortars or insulation boards has been increasing in recent years, both in new constructions and in the thermal retrofitting of building facades. However, there is still a lack of reliable data on the performance and durability of these systems. The main objective of this thesis is to provide consistent knowledge on the durability of multilayer external wall thermal insulation systems to increase their efficiency and sustainability over time. The focus of the research was put on the durability assessment of these systems, identifying the main degradation agents and mechanisms and giving special attention to biocolonization problems. The methodology designed to achieve the main objective of the thesis can be overall divided into four categories: (i) experimental characterization of External Thermal Insulation Composite Systems (ETICS); (ii) durability assessment of ETICS through accelerated aging and natural weathering; (iii) durability assessment of multilayer external wall thermal insulation systems with thermal mortars (accelerated and natural aging); and (iv) assessment of the influence of the hygrothermal behavior of multilayer insulation systems on mold growth through onsite monitoring, numerical simulations and experimental validation. The research on the experimental characterization and durability of ETICS deepened the understanding about the long-term behavior of these systems when subjected to several accelerated aging cycles (i.e., hygrothermal cycles, UV radiation and air pollutants (SO2) exposure). Moreover, the long-term durability of the ETICS after two years of outdoor exposure at both urban and maritime conditions in Portugal was also assessed. The results showed that the performance and durability of the complete system was significantly affected by the rendering system formulation (i.e., base coat and finishing coat compositions). The hygrothermal accelerated aging was the most severe conditioning, when compared to UV and SO2 aging cycles or natural weathering. In fact, even though the most significant degradation agents were present in both aging procedures (i.e., accelerated and natural), the degradation rate happened in a much shorter timespan considering the accelerated aging cycles, thus leading to different impacts on the systems. By providing a comprehensive insight on the durability of ETICS to a set of consecutive and complementary aging tests, but also considering different outdoor exposure conditions (urban vs maritime), a deeper comprehension of the relation between the degradation mechanisms and the synergistic effect of several environmental agents was provided. After having consistent knowledge about the degradation agents and mechanisms affecting the performance of ETICS with insulation boards, the durability of multilayer insulation systems with thermal insulating mortars was also assessed. The loss of performance was evaluated after hygrothermal accelerated aging and after one year of natural aging in urban conditions. The results showed similar performance trends considering the artificially and naturally aged systems, showing a significant increase of both capillary water absorption and drying capacity, extensive surface microcracking, traces of biological growth and aesthetic alterations. Nevertheless, the results also showed that the possible synergistic effects of other degradation agents (e.g., UV radiation, biological colonization) not included in the accelerated aging procedure have a significant impact on the long-term performance of the multilayer insulation systems. Despite the difficulty in reproducing these effects in laboratorial conditions, important degradation agents identified in long-term field exposure should be considered in optimized accelerated aging procedures. Regarding the influence of the hygrothermal behavior of the multilayer insulation systems on mold growth, the results showed a significant impact of the fluctuation in surface temperature (ST) and surface relative humidity (SRH). Both index 2 (i.e., percentage of time with SRH = 100%) and index 3 (i.e., percentage of time with SRH ≥ 80% and 15 ºC ≤ ST ≤ 30 ºC) indicated a higher potential of mold growth for the lime-based system and a lower potential for the acrylic-based system with an EPS-based thermal mortar. The lime-based system obtained the highest rate of mold growth after aging, suggesting that indices 2 and 3 are in agreement with field observations and thus can provide an indication on mold growth. The results showed that a combination of unfavorable microclimatic conditions (i.e., SRH ≤ 80%; ST < 15 ºC or ST > 30 ºC) and surface hydrophobicity are fundamental to avoid mold growth on multilayer external wall thermal insulation systems, regardless of the incorporation of biocide in the finishing coat composition. The results obtained in this thesis may therefore contribute to define the required bases to increase the performance and durability of multilayer external wall thermal insulation systems applied in both new construction and in the thermal retrofitting of building facades.
Publication details
Authors in the community:
João Luís Carreiras Ribeiro Parracha
ist198918
Supervisors of this institution:
Maria do Rosário da Silva Veiga
ist120758
Lina Maria Ribeiro Nunes
ist414983
RENATES TID
101646887
Degree Name
Doutoramento em Engenharia Civil
Fields of Science and Technology (FOS)
civil-engineering - Civil engineering
Keywords
- Argamassas térmicas
- Avaliação da durabilidade
- Envelhecimento acelerado
- Envelhecimento natural
- Colonização biológica
- ETICS
- Thermal mortars
- Durability assessment
- Accelerated aging procedure
- Natural aging
- Biological colonization
Publication language (ISO code)
eng - English
Rights type:
Only metadata available
Institution name
Instituto Superior Técnico
Financing entity
Fundação para a Ciência e a Tecnologia
Title of the project, award or grant: Durability for sustainability of multilayer rendering systems. ETICS and thermal mortars
Identifier for the funding entity: https://doi.org/10.13039/501100001871
Type of identifier of the funding entity: Crossref Funder
Number for the project, award or grant: 2020.05180.BD