Master's Thesis

Bioaerosol Transport and Sensor in Passenger Aircraft

Carlos Miguel Loureiro dos Santos Simões Raposo — 2022

Key information

Authors:

Carlos Miguel Loureiro dos Santos Simões Raposo (Carlos L. S. Raposo)

Supervisors:

João Manuel Melo de Sousa (João Manuel Melo de Sousa)

Published in

December 7, 2022

Abstract

To aid the prevention and mitigation of the next pandemic, aircraft cabins must be continuously designed to ventilate effectively any contaminant dispersed in the air, and eventually allowing the early detection of an event of pathogen spreading using bioaerosol sensors. A RANS simulation, employing a modified k-ε approach and involving a detailed diffuser geometry, was used to accurately simulate the complex behavior of the ventilation jets and compare the results obtained with available experimental data. The modified realizable k-ε turbulence model was validated using quantitative and qualitative methods for a half-row cabin. Subsequently, a contaminant was continuously injected into the center and side of the 3-row cabin, and ultimately conjugated with the use of gaspers. Briefly, it was found that, if gaspers are normal to the wall, the conjugated effect with the moist air flow vortex and thermal plume creates a condition of still air, thereby promoting diffusion and decreasing dispersion. Finally, either with gaspers turned on or off, the suggested locations for future sensors would be on the ceiling right above the passenger, and in the backseat surface of the front seat.

Publication details

Authors in the community:

Supervisors of this institution:

Degree Name

Master in Aerospace Engineering

Fields of Science and Technology (FOS)

mechanical-engineering - Mechanical engineering

Publication language (ISO code)

eng - English

Alternative identifier (URI)

https://doi.org/10.5281/zenodo.7444210

Rights type:

Embargo lifted

Date available:

October 20, 2023

Institution name

Instituto Superior Técnico