Master's Thesis

Mechanical Behaviour of friction stir butt welded joints under different loading and temperatures conditions

Lucas Rodrigues Pinto — 2021

Key information

Authors:

Lucas Rodrigues Pinto (Lucas Rodrigues Pinto)

Supervisors:

Catarina Vidal; Virgínia Isabel Monteiro Nabais Infante (Virgínia Isabel Monteiro Nabais Infante)

Published in

November 29, 2021

Abstract

Friction Stir Welding is a process that has led to an increase in the use of aluminum and its alloys in different industries, since, as an autogenous, solid-state welding process, it allows to obtain significantly lighter structures that benefit from the absence of melting of the base materials. The work developed within the scope of this thesis was focused on the analysis of the mechanical behavior of AA7075-T651 friction stir butt welded joints, of 4 mm thickness, under different loading and temperature conditions. A selection process was put into place in order to assure that appropriate welding parameters were being used to produce the welds from which fatigue specimens would be manufactured from. The welds from which those specimens were manufactured from were submitted to non-destructive tests in order to assess the presence of welding defects. Fatigue tests were carried out, under a constant amplitude loading regime, at two different stress ratios (0.05 and 0.5) and two different temperatures: 23 ºC and 150 ºC. The results obtained by the fatigue tests point to a higher fatigue life of the specimens when the highest stress ratio was employed (for the maximum stress applied) for both loading temperatures. Regarding the stress range, the contrary was found to be true: the lower stress ratio resulted in a higher fatigue life. Room temperature was also found to result in a significantly better fatigue performance. A Scanning Electron Microscope was used in order to characterize the fatigue fracture surfaces.

Publication details

Authors in the community:

Supervisors of this institution:

Fields of Science and Technology (FOS)

mechanical-engineering - Mechanical engineering

Publication language (ISO code)

por - Portuguese

Rights type:

Embargo lifted

Date available:

October 10, 2022

Institution name

Instituto Superior Técnico