Master's Thesis

VIENA electric vehicle: implementation and performance optimization

Gonçalo Vieira da Silva — 2023

Key information

Authors:

Gonçalo Vieira da Silva (Gonçalo Vieira da Silva)

Supervisors:

João Filipe Pereira Fernandes (João Filipe Pereira Fernandes); Paulo José da Costa Branco (Paulo José da Costa Branco)

Published in

November 21, 2023

Abstract

O projeto VIENA é uma plataforma de ensino, assente num FIAT 600 Elettra, desenvolvida por professores e alunos do Instituto Superior Técnico, com o objetivo de consolidar e implementar conceitos relacionados com a mobilidade elétrica e autónoma. O projeto VIENA incide sobre três sistemas: o sistema de propulsão, o sistema de direção e o sistema de controlo. Esta tese foca-se no sistema de propulsão tendo como objetivo a calibração de parâmetros do inversor do carro, instalação do pack principal de baterias, e calibração do modelo de simulação VIENA. Para a instalação da bateria foram alterados os conectores de potência e sinal, de modo a simplificar as ligações para facilitar a resolução de avarias. Os interruptores e as suas estruturas foram alterados de modo a melhorar a fiabilidade do carro. Para melhorar o comportamento do automóvel e comprovar a sua fiabilidade foram realizados vários testes. Estes foram efetuados em diferentes condições de estrada, com diferentes inclinações e a diferentes temperaturas exteriores. Estes ensaios permitiram, também, obter dados para a calibração do modelo. O modelo de calibração foi atualizado para incorporar o coeficiente de atrito viscoso e o coeficiente de indução. Foram também atualizados outros parâmetros, como o peso, o coeficiente de atrito das rodas e os ângulos da estrada. Os testes comprovaram o correto funcionamento do carro. Os dados obtidos foram utilizados para melhorar a fiabilidade do modelo. Foi conseguido um erro médio de 8.9 %, que é cinco vezes menos que o erro inicial de 45 %. The VIENA project is a teaching platform, based on FIAT 600 Elettra developed by tecnico’s Professors and students aiming to consolidate and implement concepts related to electric and autonomous mobility. This platform has three main systems: The powertrain, the steering, and the control and sensors’ systems. This thesis focuses on the powertrain of the car, with the objective of improving the inverter’s control calibration, installing the main battery and auxiliary devices, and the calibration of VIENA’s simulation model. For the battery installation, power and temperature connectors were changed, in order to simplify the connections for easier fault resolution. Switches and their enclosures were also changed to simplify and enhance the car’s operation. To improve the car’s handling and to prove the car’s reliability, several tests were carried out. These were done on different road conditions, with different road inclinations, and at different ambient temperatures. The tests also served to retrieve data to be used to calibrate the simulation model. A simulation model of the VIENA was calibrated to incorporate the viscous friction coefficient of the powertrain and the change of the induction coefficient variation with the motor operation. Also, other parameters were updated, such as the car’s weight, wheel friction, and road angles. The tests proved the correct operation of the new batteries and provided relevant data for analysis. These data were used to improve the model’s trustworthiness, which was accomplished by getting an average error of 8.9 %, which is five times lower than the original error, 45 %.

Publication details

Authors in the community:

Supervisors of this institution:

RENATES TID

203838513

Degree Name

Mestrado em Engenharia Eletrotécnica e de Computadores

Fields of Science and Technology (FOS)

electrical-engineering-electronic-engineering-information-engineering - Electrical engineering, electronic engineering, information engineering

Keywords

  • Battery installation
  • Driverless
  • Electric Mobility
  • Inverter
  • VIENA
  • Inversor
  • Instalação de baterias
  • Mobilidade Elétrica
  • Veiculo autónomo

Publication language (ISO code)

eng - English

Rights type:

Embargo lifted

Date available:

September 10, 2024

Institution name

Instituto Superior Técnico