Master's Thesis

Fluorocarbon gas permeability through ionic liquid supported membranes

Francisco Manuel Da Silva e Cunha — 2021

Key information

Authors:

Francisco Manuel Da Silva e Cunha (Francisco Manuel Da Silva e Cunha)

Supervisors:

Isabel Maria Delgado Jana Marrucho Ferreira (Isabel Maria Delgado Jana Marrucho Ferreira); Mark Shiflet

Published in

January 28, 2021

Abstract

This work focuses on the separation of R-410A into its components, allowing for HFC-32 to be recovered and reused for the manufacturing of newer, more advanced types of refrigerants that would be better for the environment. In the first part of this work, SILMs were used to separate R-410A’s components, testing out a variety of ionic liquids for this purpose. A membrane cell apparatus was constructed and tested in order to perform these measurements, and they were compared with separation attempts using the same ILs in a gravimetric microbalance. It was concluded that SILMs made using ILs of a lower molar volume, as well as a low viscosity achieve higher permeate purity for HFC-32, while also observing that the process is controlled by the diffusion mechanism. In the second part of this work, a membrane module for Aspen Custom Modeler was exported into the Aspen Plus software, with [C2C1im]SCN and [C6C1][FAP] were chosen as the best candidates for a two-membrane system that achieved a permeate flow of 14% of the base feed with approximately 99% purity for HFC-32.

Publication details

Authors in the community:

Supervisors of this institution:

Fields of Science and Technology (FOS)

chemical-engineering - Chemical engineering

Publication language (ISO code)

por - Portuguese

Rights type:

Embargo lifted

Date available:

December 18, 2021

Institution name

Instituto Superior Técnico