Dissertação de Mestrado
Optimization of Microfluidic Systems For Chromatography Applications In PDMS and COC Structures
— 2024
Informações chave
Autores:
Orientadores:
Publicado em
25 de novembro de 2024
Resumo
The present work was focused on optimizing microfluidic chromatography systems by comparing polydimethylsiloxane (PDMS) and cyclic olefin copolymer (COC) structures. This objective was achieved through the design and fabrication for both materials and the performance of experimental breakthrough curves in a fluorescence microscopy for different fluorophores, stationary phases, and mobile phases. A set of conditions was tested with two different fluorophores: fluorescein isothiocyanate (FITC) and rhodamine B; two different mobile phases: ethanol 96% and milliQ water; and two stationary phases with a diameter dispersion between 45-75 μm: C18 beads and SiO2 beads. Focusing on one condition for each material, breakthrough curves with flow rates ranging between 0.5 and 5 μL/min were performed. The breakthrough curves were then derived and fitted to extract values of retention time and full width at half maximum (FWHM), allowing the calculation of the number of theoretical plates (N) and plate height (H). In addition, analysis of the breakthrough curves, derivatives and van Deemter curve were conducted to evaluate column efficiency. The results highlighted that the highest column efficiency was achieved with the COC structure, with 32,940 plates/m, outperforming the PDMS device which had 19,414 plates/m. Finally, reducing the stationary phase particle diameter to 10 μm was also assessed.
Detalhes da publicação
Autores da comunidade :
Rafael Santos Batista
ist1105781
Orientadores desta instituição:
Domínio Científico (FOS)
industrial-biotechnology - Biotecnologia Industrial
Idioma da publicação (código ISO)
eng - Inglês
Acesso à publicação:
Embargo levantado
Data do fim do embargo:
19 de setembro de 2025
Nome da instituição
Instituto Superior Técnico