Article In: cienciavitae

Effect of long-term moisture exposure on impact response of glass-reinforced vinylester

Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment

Alizadeh, Fatemeh; Kharghani, Navid; Guedes Soares, Carlos — 2021 — SAGE Publications

Key information

Authors:

Alizadeh, Fatemeh; Kharghani, Navid; Guedes Soares, Carlos (Carlos Guedes Soares)

Published in

February 27, 2021

Abstract

<jats:p> Glass/Vinylester composite laminates are comprehensively characterised to assess its impact response behaviour under moisture exposure in marine structures. An instrumented drop weight impact machine is utilised to determine the impact responses of dry and immersed specimens in normal, salted and sea water. The specimens, which had three different thicknesses, were subjected to water exposure for a very long period of over 20 months before tested in a low-velocity impact experiment. Water uptake was measured primarily to study the degradation profiles of GRP laminates after being permeated by water. Matrix dissolution and interfacial damage observed on the laminates after prolonged moisture exposure while the absorption behaviour was found typically non-Fickian. The weight of the composite plates firstly increased because of water diffusion up to month 15 and then decreased due to matrix degradation. The specimens with 3, 6 and 9 mm thickness exhibited maximum water absorption corresponding to 2.6%, 0.7% and 0.5% weight gain, respectively. In general, the results indicated that water uptake and impact properties were affected by thickness and less by water type. Impact properties of prolonged immersed specimens reduced remarkably, and intense failure modes detected almost in all cases. The least sensitive to impact damage were wet specimens with 9 mm thickness as they indicated similar maximum load and absorbed energy for different impact energies. </jats:p>

Publication details

Authors in the community:

Publication version

VoR - Version of Record

Publisher

SAGE Publications

Title of the publication container

Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment

First page or article number

854

Last page

865

Volume

235

Issue

4

ISSN

1475-0902

Fields of Science and Technology (FOS)

other-engineering-and-technologies - Other engineering and technologies

Keywords

  • Mechanical Engineering
  • Ocean Engineering

Publication language (ISO code)

eng - English

Alternative identifier (URI)

http://dx.doi.org/10.1177/1475090221996167

Rights type:

Only metadata available