Article In: orcid

Geometrical parameters effect on aerodynamic performance of infinite tubercle leading edge wings

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects

Amirfarhang Nikkhoo; Ali Esmaeili — 2024 — tandfonline

Key information

Authors:

Amirfarhang Nikkhoo; Ali Esmaeili (Ali Esmaeili)

Published in

December 31, 2024

Abstract

Micro aerial vehicles (MAVs) encounter aerodynamic challenges due to their small size and low flying speed, often experiencing stall at low angles of attack. This study aims to investigate the effects of sectional airfoil geometries, including thickness, maximum thickness location, and camber, on the aerodynamic performance of fixed-wing MAVs inspired by the passive control method observed in Humpback whales. The investigation employs 3D, unsteady, viscous, and turbulent simulations using the detached eddy simulation turbulence model to understand the physical phenomena. Results reveal that increasing the thickness of the infinite wing by approximately 9.5% results in a decrease of lift and drag coefficients by 19.8% and 12%, respectively. Furthermore, shifting the maximum thickness location from 18%c to 36%c enhances the lift-to-drag ratio (L/D) by nearly 16%. However, an increase in camber leads to a rise in drag coefficient. In conclusion, this research sheds light on the aerodynamic effects of sectional airfoil geometries on fixed-wing MAVs, particularly in pre-stall conditions. Understanding these effects contributes to the development of strategies for improving MAV maneuverability and aerodynamic performance.

Publication details

Authors in the community:

  • Ali Esmaeili

    Ali Esmaeili

    ist90808

    In: orcid

    ID: 168479048

Publication version

AM - Accepted manuscript

Publisher

tandfonline

Title of the publication container

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects

First page or article number

13596

Last page

13615

Volume

24

Issue

1

Fields of Science and Technology (FOS)

mechanical-engineering - Mechanical engineering

Keywords

  • Aerodynamic forces
  • camber; laminar separation bubble; maximum thickness location; thickness
  • tubercle leading edge wing

Publication language (ISO code)

eng - English

Rights type:

Only metadata available