PhD Thesis
Atomic-scale measurements of charge distribution-transport in 2D quantum structures
Medições à escala atómica de distribuição-transporte de carga em estruturas quânticas 2D
— 2024
Key information
Authors:
Supervisors:
Published in
December 20, 2024
Abstract
Em geral, os materiais bidimensionais (2D) exibem uma variedade de propriedades desejáveis. No entanto, a sua implementação em nanotecnologia do futuro é fortemente afetada pela existência de defeitos estruturais. Uma compreensão completa dos defeitos mais prevalentes num material específico e dos mecanismos através dos quais esses defeitos afetam as propriedades funcionais é então fundamental para o desenvolvimento de aplicações. Neste contexto, a caracterização de um determinado defeito estrutural apresenta um desafio considerável, especialmente aqueles que exigem medições capazes de alcançar resolução atómica e que também sejam sensíveis à estrutura eletrónica do material. O uso de contraste de fase diferencial (DPC) em microscopia eletrónica de varrimento e transmissão (STEM) atinge este propósito aproveitando a interação natural entre a sonda de eletrões e os campos eletromagnéticos intrínsecos duma amostra, que provoca uma redistribuição da intensidade observada no plano de difração. Para amostras finas, o deslocamento do centro de massa (CoM) do feixe de eletrões é então proporcional à configuração local de forças eletromagnéticas que atuam sobre ele, permitindo o mapeamento em projeção de campos eletrostáticos a escalas atómicas. Tais medições têm sido realizadas principalmente com detetores anulares divididos em quatro segmentos independentes, capazes de medições aproximadas do CoM com uma precisão intrinsecamente limitada pela geometria do detetor. Medições mais precisas tornaramse possíveis com o desenvolvimento de detetores pixelados, que registam detalhadamente a distribuição de intensidade do feixe de eletrões, embora ao custo de tempos de aquisição mais longos e menor flexibilidade durante observações. Sendo estas desvantagens particularmente prejudiciais na observação de amostras sensíveis ao feixe, como materiais 2D, é importante definir metodologias sólidas que permitam uma análise mais precisa de medições por detetores segmentados. Neste trabalho, as dinâmicas de formação assim como a influência de defeitos específicos de pequena escala nas configurações eletrostáticas de materiais semicondutores 2D promissores – MoS2 e MoSe2 – é caracterizada ao nível atómico através de DPC-STEM por detetor segmentado. Adicionalmente, a influência dos principais parâmetros experimentais em observações DPC-STEM é quantificada através de vastas simulações de imagens. Two-dimensional (2D) materials generally exhibit a range of desirable and outstanding properties. Yet, their implementation in future nanoelectronics is strongly affected by the existence of structural defects. Therefore, a thorough understanding of the most prevalent defects related to a specific material, and the mechanisms by which these defects affect their functional properties is critical for the development of applications. In this regard, the characterisation of a particular structural defect, poses a considerable challenge, especially those that require measurements capable of achieving atomic resolution that are also sensitive to the electronic structure of the material. The use of differential-phase contrast (DPC) in scanning transmission electron microscopy (STEM) achieves this purpose by leveraging the interaction between the fine electron probe and the intrinsic electromagnetic fields of a sample, which result in a redistribution of intensity at the diffraction plane. For thin specimens, the shift in centre of mass (CoM) of the electron beam is then proportional to the local configuration of electromagnetic forces acting on it, allowing for the mapping of projected electrostatic fields at atomic scales. Such measurements have been mostly carried out with annular detectors split into four independent segments, providing approximated CoM measurements with an accuracy that is intrinsically limited by the geometry of the detector. More precise measurements became possible with the development of pixelated detectors, which record the intensity distribution of the electron beam in great detail, albeit at the cost of increased acquisition times and less flexibility during observations. As these drawbacks are particularly detrimental when observing beam-sensitive samples, such as 2D materials, it is highly relevant to define solid methodologies that allow for more accurate analysis of segmented-detector measurements. In this work, the formation dynamics as well as the influence of select small-scale defects on the atomic electrostatic configurations of promising 2D semiconductor materials – MoS2 and MoSe2 – is characterised through segmented-detector DPC-STEM. Additionally, the influence of key experimental parameters on DPC-STEM observations is quantified through extensive image simulations.
Publication details
Authors in the community:
Rafael Veloso Ferreira
ist194671
Supervisors of this institution:
RENATES TID
101604521
Degree Name
Doutoramento em Engenharia de Materiais
Fields of Science and Technology (FOS)
materials-engineering - Materials engineering
Keywords
- Scanning transmission electron microscopy
- differential-phase contrast
- multislice image simulations
- 2D materials
- structural defects
- Microscopia eletrónica de varrimento e transmissão
- contraste de fase diferencial
- simulações multislice de imagens
- materiais 2D
- defeitos estruturais
Publication language (ISO code)
eng - English
Rights type:
Open access
Institution name
Instituto Superior Técnico
Financing entity
Fundação para a Ciência e a Tecnologia
Identifier for the funding entity: https://doi.org/10.13039/501100001871
Type of identifier of the funding entity: Crossref Funder