Master's Thesis
Development and Validation of Ultrasonic Fatigue Testing Machine for Three Point Bending with Pre-Load
— 2025
Key information
Authors:
Supervisors:
Published in
July 4, 2025
Abstract
The present dissertation focused on the development of a test rig capable of performing ultrasonic fatigue tests (UFT) on 3-point bending configuration (R ≠ -1). The mechanical project machine required the development of two systems: one for applying and maintaining pre-load, further referred to as mechanical system; and one ultrasonic system capable of applying cyclic loading to the specimen by resonance at 20kHz. The mechanical system development started by repurposing the pre-existing frame of an axial test rig and installing an axial load cell. Then, a manual loading mechanism was designed, implemented to said frame, and validated in terms of load stability over time. Development of the ultrasonic system was carried out by means of analytical and numerical models, which were later compared to experimental results. Since the calculation models and experimental measurements can be used to determine natural frequency and displacement in points of the ultrasonic setup, these variables were used for comparison. Finally, a method to verify the proper working order of the machine was proposed and used to find manufacturing issues in one of the ultrasonic parts. Because of that, the base for determination of acceptable manufacturing tolerances is put forward for further development in future works.
Publication details
Authors in the community:
Marco Túlio Soares Coutinho
ist1104685
Supervisors of this institution:
Luís Filipe Galrão dos Reis
ist13987
Fields of Science and Technology (FOS)
mechanical-engineering - Mechanical engineering
Publication language (ISO code)
por - Portuguese
Rights type:
Embargo lifted
Date available:
June 24, 2026
Institution name
Instituto Superior Técnico