Master's Thesis
Hydrogen enriched Methane flames anchoring on a multi-hole burner
— 2022
Key information
Authors:
Supervisors:
Published in
July 13, 2022
Abstract
In this thesis two premixed Bunsen flames were studied: the first, on a single-hole burner; and the second, on a multi-hole burner composed by a center hole surrounded by 16 minor holes. Initially, flame stability diagrams were made, defined by the flame extinction phenomena flashback and blowoff, using methane, and two different methane and hydrogen mixtures, H2EM-5% and H2EM-10%. The multi-hole geometry reached the maximum power output of 2700 W and a minimum equivalence ratio φminimum = 0.6, in comparison to the single-hole power of 360 W and φminimum = 0.8. A flame morphology analysis was also made. An analysis of the local equivalence ratio φlocal of the flame, through spectroscopy, to obtain its evolution along the flame length. For the single-hole geometry, it was noticed a light reduction of φ on the flame anchoring zone. For the multi-hole, the reduction of φ on the flame base increased with Re, due to air convection. For the single-hole geometry, a diffusion model was built, to compare the amount of oxygen entrained ∆QO2 by molecular diffusion with ∆QO2 that reduced φ on the spectroscopy results. With the increase of both parameters φ or Re, the value of oxygen entrained obtained by spectroscopy was much higher than the value obtained by diffusion. Overall, the combination of the multi-hole geometry with the hydrogen enrichment resulted on a significant increase of power, as well as an enlargement of the lean-mixture range.
Publication details
Authors in the community:
Supervisors of this institution:
Sandra Isabel Godinho Dias
ist427130
Edgar Caetano Fernandes
ist13408
Fields of Science and Technology (FOS)
mechanical-engineering - Mechanical engineering
Publication language (ISO code)
por - Portuguese
Rights type:
Embargo lifted
Date available:
May 3, 2023
Institution name
Instituto Superior Técnico