Master's Thesis
Assessment of the Numerical Properties of ReFRESCO: a Pressure-Based Compressible Flow Solver
— 2021
Key information
Authors:
Supervisors:
Published in
January 29, 2021
Abstract
This work assesses the numerical robustness (iterative errors) and accuracy (discretization errors) of the single-phase, pressure-based compressible flow solver developed within the ReFRESCO CFD package. The objectives of the work are threefold: check the ability to reduce iterative errors to negligible levels (robustness); estimate the order of grid convergence (accuracy) for integral and local quantities of interest and compare ReFRESCO solutions with reference data available in the open literature. Two sets of test cases are selected: three two-dimensional, subsonic, turbulent flows (zero pressure gradient flat plate flow, bump-in-channel and NACA 0012 airfoil) available at the NASA Turbulence Modeling Resource; three two-dimensional inviscid flows over a circular-arc (bump) that correspond to subsonic, transonic and supersonic conditions that have been addressed in the open literature. Grid refinement studies have been performed for all test cases using sets of geometrically similar grids that allow a reliable estimation of the observed order of grid convergence. The robustness of the code is demonstrated since iterative errors can be reduced to values close to machine accuracy for (almost) all test cases. Iterative convergence is strongly dependent on grid density and the solution of the pressure correction equation plays a crucial role in the robustness of the solution procedure. Observed orders of grid convergence depends on the test case, selected quantity of interest and grid refinement level. ReFRESCO results are consistent with the reference data available in the open literature, but numerical oscillations can appear at shocks, geometric discontinuities or poor quality (large eccentricity) grids.
Publication details
Authors in the community:
Cristiano Miguel Filipe Silva
ist193820
Supervisors of this institution:
Luís Rego da Cunha de Eça
ist12278
Fields of Science and Technology (FOS)
mechanical-engineering - Mechanical engineering
Publication language (ISO code)
por - Portuguese
Rights type:
Embargo lifted
Date available:
December 7, 2021
Institution name
Instituto Superior Técnico