Article

Blends Containing Tetramethyl Bisphenol-A Polycarbonate. PART I: Styrenic Polymers

POLYMER

Anabela Catarino ; J.W. Barlow; D.R. Paul — 1986

Key information

Authors:

Anabela Catarino (Anabela Catarino Fernandes); J.W. Barlow; D.R. Paul

Published in

November 1986

Abstract

The phase behaviour of blends of tetramethyl bisphenol-A polycarbonate, MPC, with styrene copolymers and substituted styrene homopolymers was examined using d.s.c. and optical indications of phase separation on heating, i.e. lower critical solution temperature, LCST, behaviour. MPC was found to be miscible with styrene/acrylonitrile copolymers, SAN, having an AN content smaller than 13%, with a styrene/maleic anhydride copolymer, SMA, having an MA content equal to 8% and with oligomeric styrene/allyl alcohol copolymers, SAA, having an AA content less than 19.1%. MPC was also found to be miscible with an oligomeric poly(-methyl styrene), PMS, and a copolymer of -methyl styrene/acrylonitrile, PMSAN. Some of the mixtures showed LCST behaviour and based on this and excess volume measurements, to the extent possible, qualitative conclusions were made concerning the relative strength of the interactions among the various blend pairs. It appears that small amounts of AN or MA in the copolymers apparently increases the strength of interactions relative to those observed in polystyrene blends with MPC, whereas the inclusion of a methyl group in the styrenic repeat unit has the opposite effect. The phase behaviour of MPC with styrene based copolymers appears to be influenced by intrachain repulsion between styrene and comonomer units. MPC was found to undergo thermal and solvent induced crystallization when blends were cast from tetrahydrofuran and toluene solutions, but no crystallinity was observed when methylene chloride was used as the solvent.

Publication details

Authors in the community:

Title of the publication container

POLYMER

First page or article number

1788

Last page

1798

Volume

27

Issue

11

Fields of Science and Technology (FOS)

chemical-engineering - Chemical engineering

Publication language (ISO code)

eng - English

Rights type:

Only metadata available