Master's Thesis

Produção de espumas de poliuretano à base de componentes sustentáveis e estudo da adição de PCMs nas mesmas

Paulo Miguel dos Santos Ramiro — 2021

Key information

Authors:

Paulo Miguel dos Santos Ramiro (Paulo Miguel Dos Santos Ramiro)

Supervisors:

Salomé Inês Cardoso Gomes Vieira (Salomé Inês Cardoso Gomes Vieira); Rui Miguel Galhano dos Santos Lopes (Rui Galhano dos Santos)

Published in

December 6, 2021

Abstract

Polyurethane is the result of mixing two main components (Polyl and (poly)isocyaate), giving rise to an exothermic reaction and from which, by adjusting the formulations, it is possible to obtain several foams with unique properties. Phase change materials are materials that have the ability to absorb/release large amounts of latent heat in a well-defined temperature range during their phase/state change process. In order to meet the needs of technological and environmental development, this work obtained a foam where the two main components have a more sustainable base, adding phase change materials, with the objective of improving the thermal properties of foams, thus obtaining a product with better performance in terms of thermal insulation. The PCMs embedded in the foams were encapsulated and in the form of a concentrated dispersion. During the work, several characterization techniques were used to study the properties of the foams produced. Among them, infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), measurement of thermal properties and densities, uniaxial compression assays, and scanning electron microscopy (SEM). Initially it began by characterizing the Polyol derived from food oils. Polyisocyanate (Desmodur ECO N7300) was then characterized. Also following these actions, the thermal stability of the PCM was verified using a TGA analysis. After depending on the base formulation, changes were made to it, and the properties of foams obtained using the characterization techniques described above were analyzed.

Publication details

Authors in the community:

Supervisors of this institution:

Fields of Science and Technology (FOS)

mechanical-engineering - Mechanical engineering

Publication language (ISO code)

por - Portuguese

Rights type:

Embargo lifted

Date available:

September 21, 2022

Institution name

Instituto Superior Técnico